Custom Millwork in Hudson Valley, NY

The Timber Millwork Division designs, produces, and installs custom cabinetry, built-ins, and furniture for renovation and new construction projects throughout the Hudson Valley. We operate three dedicated facilities: a custom cabinet shop in Marlboro, a furniture-making facility in New Paltz, and a 2,500 square foot finishing facility in Wallkill — all staffed by our own team, not subcontractors.

Most millwork in residential construction is ordered from a manufacturer's catalog, modified with fillers and scribes to fit a space that was never designed around those fixed dimensions, and installed by a separate crew. The Timber Millwork Division does the opposite: every piece is designed to the actual dimensions of your room, produced in our own shop, finished in our own facility, and installed by our own carpenters. Jeff Wiegmann and Chris Rall oversee both the construction and the millwork on every project — which means the cabinet shop and the job site are coordinated by the same people, not managed as separate contracts.

What Makes Timber Millwork Different

The standard path for a kitchen remodel is to hire a remodeling contractor and a kitchen dealer separately. The contractor manages demolition, structural work, and rough-in; the kitchen dealer manages cabinet design, ordering, and installation. When something does not align — and it rarely does perfectly — each party points to the other. Lead times extend. Reorder fees appear. The homeowner is stuck in the middle.

Timber's in-house millwork operation eliminates that gap entirely. Our design coordinator Amanda Barton designs your cabinetry in Chief Architect software, producing detailed 3D renderings before production begins. When the construction crew opens a wall and finds conditions that differ from the drawings — as they frequently do in homes built before 1990 — the cabinet shop adjusts to the actual field dimensions. There is no separate vendor to notify, no lead time extension, no reorder fee.

This is why Timber Millwork is not a standalone cabinet shop. It is an integrated part of a design-build operation — and the integration is what produces consistent results. Read the full comparison: When to Hire a Design-Build Firm vs. a Kitchen Dealer.

What the Timber Millwork Division Produces

Kitchen Cabinetry: Full custom, plywood box construction with dovetail drawer boxes and soft-close hardware as standard. Every cabinet is built to the exact dimensions of your kitchen — not a stock size modified with fillers. We produce face-frame and frameless (European) boxes, in any wood species or paint-grade finish. Most kitchen cabinetry projects for a full renovation cost $25,000–$65,000 depending on scope, materials, and hardware selections.

Bathroom Vanities: Single and double configurations, any dimension, integrated or undermount sink options. Custom vanities built for your bathroom renovation — designed to the exact footprint of your bathroom, not shimmed into a space that does not fit. Vanity projects typically run $3,500–$12,000 depending on size and specification.

Built-In Shelving and Bookcases: Floor-to-ceiling library walls, flanking fireplace built-ins, alcove shelving, window seat storage. These are among our most requested millwork projects — Hudson Valley homes with older architecture frequently have opportunities for built-ins that read as original to the house. A single built-in unit typically runs $4,000–$8,000 installed; a full library wall with upper and lower cabinets runs $12,000–$30,000.

Home Office Built-Ins: Integrated desk runs, overhead cabinets, bookcase walls, filing storage. Post-2020 demand for home office built-ins has been consistent — most clients want a workspace that reads as a finished room rather than a furniture arrangement. Office built-in projects typically run $8,000–$20,000 depending on the scope and room dimensions.

Mudroom Systems: Bench, open cubbies, hooks, upper cabinets, and shoe storage designed as one integrated system for your entry. Custom mudrooms are among the highest-value millwork investments in a renovation — the combination of storage function and visual welcome has a disproportionate effect on how a home feels. Mudroom systems run $6,000–$18,000 depending on size and configuration.

Entertainment Centers and Media Walls: Integrated AV component storage, equipment ventilation, display shelving, and wire management — designed around your actual equipment and the proportions of your room. We do not produce generic media cabinets; these are custom pieces that treat your television and audio equipment as architectural elements.

Custom Furniture: Dining tables, bedroom sets, console tables, coffee tables, benches — produced in our New Paltz furniture facility. Custom furniture is produced for both standalone projects and as part of larger renovations where standard furniture does not fit the dimensions or design of the finished space. Custom furniture pieces range from $2,500 for a simple bench to $15,000+ for a full dining table with custom base.

The Design Process: 3D Before Production

Every millwork project begins with a design phase in Chief Architect software. Amanda Barton produces detailed 3D renderings of your kitchen, built-in, or furniture piece before any material is ordered or production begins. These renderings show not just the dimensions and layout but the actual wood species, finish color, and hardware — so you can see exactly what you are approving before production starts.

For kitchen cabinetry and large built-in projects, we typically produce a dimensioned elevation drawing for each wall, a 3D perspective view of the complete installation, and a detail drawing for any custom elements — glass doors, integrated lighting, unusual hardware configurations. These drawings become the production documents that our shop works from.

Field measurement happens after the design is approved and before production begins. We measure the actual room — not the drawings — because framing dimensions and finished wall conditions are almost never exactly what the construction drawings specify. Production begins from the field dimensions, which is why our pieces fit without shimming, scribing, or visible gaps.

Why In-House Production Matters

When you order cabinetry from a manufacturer's catalog — even a semi-custom line — you are working within their system. Their box sizes, their lead times, their modification fees, their production schedule. When a dimension changes in the field, you place a change order, pay a fee, and wait 4–8 weeks for the revised piece. Meanwhile, the installation is on hold and the contractor's crew is either idle or working on something else.

The Timber Millwork Division produces in our own shop. When a dimension changes — because framing shifted, because a client changes their mind, because a site condition creates a conflict — the shop makes the revision and the installation proceeds. For clients on a renovation schedule, this is not a minor convenience; it is the difference between a project that finishes on schedule and one that runs 6 weeks long because a cabinet reorder took 8 weeks to arrive.

This is particularly important in renovation projects in older Hudson Valley homes where existing conditions are never perfectly regular. A built-in bookcase that must fit between two walls that are not exactly parallel, on a floor that is not perfectly level — these are normal conditions in a Hudson Valley home built before 1990. Our shop produces pieces that fit actual conditions, not theoretical drawings.

Materials, Species, and Finishes

Our cabinet shop works in domestic hardwoods: white oak, red oak, hard maple, black walnut, cherry, and hickory. For paint-grade work, we use poplar — a stable, fine-grained wood that takes a painted finish better than maple or oak. Species selection is part of the design conversation. White oak is our most commonly specified species for natural-finish kitchens and built-ins, particularly in Hudson Valley homes with modern or transitional interiors. Black walnut is the premium choice for furniture and accent pieces. See our full wood species guide.

Box construction is ¾-inch maple plywood throughout — no particleboard substrate, no MDF back panels. Drawer boxes are dovetail-joined solid wood with full-extension, soft-close undermount slides. Doors and drawer fronts are solid wood or solid wood frame-and-panel. Hardware is specified during the design phase — we work with a range of suppliers and can source pulls, knobs, and hinges from any manufacturer.

The Finishing Process

All finish application is done at our 2,500 square foot finishing facility in Wallkill, not on-site. Paint-grade cabinets receive sanding, high-build primer, additional sanding, and two topcoats — producing a factory-quality painted finish that is more durable and more uniform than painting cabinets in place after installation. We use a finish by Renner for painted cabinetry — it cures harder than standard latex and is standard practice in quality cabinet shops.

Stain-grade work receives hand or spray stain application, sealer coat, and topcoat selected for the application. We use a waterborne finish by Renner — the premium industry standard for clear coats and topcoats, delivering exceptional durability with a flawless final appearance and significantly lower VOC content than solvent-based alternatives. Furniture pieces receive an oil-varnish blend or hardwax oil finish depending on the species and the client's preference for sheen level and maintenance character.

Millwork for Historic Hudson Valley Homes

A significant share of our millwork projects are in homes built in the 19th or early 20th century — farmhouses, colonials, Dutch Revivals, and Victorian homes that have existing architectural millwork that must be matched or respected. This is work that a catalog cabinet supplier cannot do and that most modern cabinet shops do not have the experience to approach correctly.

Our shop has produced built-ins and kitchen cabinetry that match existing profiles from homes built in the 1840s through the 1920s — matching door styles, molding profiles, hardware eras, and wood species to the existing character of the house. If you are renovating a historic Hudson Valley home and you want the millwork to read as original rather than as an obvious modern addition, this is a capability that matters. Read more: Renovating a Historic Home in the Hudson Valley.

Service Area

Custom millwork across the Hudson Valley: Ulster County, Orange County, Dutchess County, and Sullivan County. Our three facilities in Marlboro, New Paltz, and Wallkill serve projects throughout the region. Most active millwork projects are within 45 minutes of our shops — New Paltz, Kingston, Woodstock, Rhinebeck, Beacon, Newburgh, Warwick, and surrounding Hudson Valley towns and villages.

Frequently Asked Questions

Does Timber produce millwork for projects outside of Timber renovations?

Yes. The Timber Millwork Division takes standalone millwork projects — kitchen cabinetry, a specific room of built-ins, or a piece of custom furniture — for clients who are not engaged in a full Timber renovation. If you need a cabinet shop that will design the piece, produce it, and install it without requiring you to manage three separate vendors, contact us to discuss your project.

How much does custom millwork cost?

Custom kitchen cabinetry for a full renovation typically runs $25,000–$65,000 depending on the kitchen size, wood species, finish, and hardware. Full library wall built-ins run $12,000–$30,000. Individual built-in units (fireplace flankers, window seats, single bookcases) run $4,000–$8,000. Custom furniture pieces start around $2,500 for simpler pieces and run higher for dining tables and bedroom sets. We provide a detailed scope and pricing after the design phase.

How long does custom millwork take to produce?

Most custom cabinetry and built-in projects take 4–6 weeks from approved drawings to delivery and installation. Custom furniture runs 6–10 weeks. For renovation projects, we coordinate production timing with the construction schedule so millwork installation can proceed immediately when the construction sequence is ready — eliminating the gap between rough-in completion and cabinet install that extends most renovation timelines.

What wood species does Timber work with?

White oak, red oak, hard maple, black walnut, cherry, hickory, and poplar for paint-grade work. Species selection affects grain character, finishing characteristics, durability, and cost. White oak is our most commonly specified species; black walnut is the premium choice for natural-finish pieces. We can source less common domestic species on request.

How is custom cabinetry different from semi-custom or stock?

Stock cabinetry is manufactured in fixed sizes — typically in 3-inch increments — and modified with fillers and scribes to fit a space that was never designed for those dimensions. Semi-custom uses the same fixed box sizes with more finish options. Custom cabinetry is built to the exact dimensions of your space — full-height panels, consistent reveals, corners that were designed rather than filled. In a kitchen renovation where you are spending $100,000 or more on the complete project, stock or semi-custom cabinetry is not the appropriate specification.

Can you match existing woodwork in an older home?

Yes. We have produced custom cabinetry and built-ins that match existing millwork profiles in Hudson Valley homes built between the 1840s and 1920s — matching door styles, molding profiles, hardware periods, and wood species to the existing character of the house. If you want new millwork to read as original to a historic home, this requires a shop that works from custom profiles rather than a manufacturer's catalog. That is what we do.